News news
Location nowHome > News > What is the content of Sichuan fountain equipment

What is the content of Sichuan fountain equipment

Publish Time:2021/01/07 News 标签:Sichuan fountain equipmentNumber of views:5

Next, Jiayue Fountain Company will introduce to you the failure of Sichuan fountain equipment. What is the relevant content?

Sichuan fountain equipment

Sichuan fountain equipment

Sichuan fountain equipment failure:

1. The fountain pump does not sprinkle, sprinkles less, and interrupts the sprinkling problem:

There may be such common faults as follows: the water suction port of the centrifugal water pump is exposed on the river surface, the moisture absorption filter is blocked, the motor is turned over, and the centrifugal impeller is damaged more seriously.

Relative solution: raise the water level or reduce the centrifugal water pump, keep the suction port about 60mm from the river surface; eliminate the dirt sucked on the filter; adjust the phase sequence of the motor; check if the gasket of the connecting flange is damaged, check the pipe If there is any dirt in the road, dismantle and repair the pipeline; dismantle and replace the more severely damaged centrifugal impeller.

2. Swing organization and posture problem:

The reasons for this type of problem may be: destruction of the swing motor in the water, breakage of the link structure or falling.

Relative solutions are: check whether the motor is damaged, remove and replace; remove the link, repair and adjust.

3, the overload protector often trips common faults:

The various possible reasons for this type are: the motor is overweight, the three-phase voltage is unbalanced, the motor winding is burned, the motor bearing is damaged and stuck, and the cable is running.

Relative solutions are: the current is too large, check the motor repair; adjust the switching power supply operating voltage; the motor winding is burned out and then the winding is removed; the rolling bearing is damaged and stuck, then the rolling bearing is removed and replaced; the cable is checked and repaired.

Nowadays, musical fountains, flower gardens, and scenic spots in big cities can be said to be very common. Therefore, it is necessary to learn and train some simple and common troubleshooting methods of musical fountains. All normal working musical fountains, musical fountains, if they appear, are common Failure, will endanger the display information music fountain.

Common faults of fountain pumps: no self-spraying, good sprinkling, temporary spraying sprayers do not need to have such common faults for a while. The reason may be: centrifugal water pump, water absorption filter device on the water inlet pipe, power plug, motor flip, centrifugal impeller damage is more serious.

Relative solution: raise the water level or reduce the water level of the centrifugal pump, keep the inlet pipe about 60mm away from the river surface; eliminate the low-frequency oscillations on the display screen; adjust the motor phase sequence; check the supporting facilities flange sealing rubber gasket Whether it is damaged, check whether there is any dirt in the pipeline, dismantle and overhaul the pipeline; the centrifugal impeller is more seriously damaged.

Music fountain does not shake: Shaking tissue is not a postural problem: This type of problem may be caused by: the motor is damaged by shaking in the water, the crankshaft is broken or dropped.

Relative solutions are: check whether the motor is burned out, disassemble and replace; change the connection, repair and adjustment.

Frequent tripping of overload protector Common faults: There are so many possible reasons: motor load, three-phase voltage imbalance, winding burnt, motor bearing damage, blockage, cable leakage.

Relative solutions are: too much electricity, check the motor maintenance; adjust the switching power supply working voltage; the motor winding is burned to change the winding; the rolling bearing damage card is to replace the rolling bearing; check the cable leakage power circuit and carry out maintenance. Music fountain square, the built-in musical fountain square will encounter various problems, such as the selection of centrifugal pumps, water level control and so on. The development trend has been obtained in the waterscape fountain manufacturing industry of the real estate industry and urbanization development.

Is there anything you don’t understand about the equipment failure of the fountain in Sichuan? You must not take these problems lightly. If you ignore these problems, it will cause more serious things to happen!

Related recommendations
Name:
Email
Message:

RSS
Follow by Email
LinkedIn
Share